About This Tilesetter Job in Edmonton

Experienced flooring professionals can apply for this tilesetter job in Edmonton, Alberta. The role involves preparing surfaces and installing tile, marble, granite and terrazzo at various project locations while maintaining accurate alignment and a high-quality finish.

The position pays $37.50 per hour for 32 hours per week. It is permanent, full-time employment with day and weekend scheduling. The listed business address is 10640–169 Street NW, Edmonton, Alberta, T5P 3X6.

Candidates need three years to less than five years of relevant experience and a secondary school graduation certificate. The successful applicant should be comfortable working independently, following measurements and completing detailed installation work in physically demanding conditions.

Tilesetter Job Details

Tilesetter Responsibilities and Daily Tasks

The tilesetter will complete installations and repairs from the preparation stage through final grouting and finishing. Accurate measurements, consistent spacing and careful material handling are important because small errors can affect the appearance and durability of the finished surface.

• Prepare, measure and mark surfaces that will be covered.
• Set tiles in position and apply pressure to secure them to the base.
• Align and straighten tiles for an even installation.
• Pack grout into tile joints and remove excess material.
• Remove and replace cracked, loose or damaged tiles.
• Build underbeds and install anchor bolts, wires and brackets.
• Cut, surface, polish and install marble and granite.
• Mix, lay and polish terrazzo surfaces.

Precision Required in a Tilesetter Job in Edmonton

Professional tile installation depends on level surfaces, straight lines, suitable spacing and clean finishing. The worker must check measurements before cutting valuable materials and should identify surface problems before installation begins. Attention to detail helps prevent uneven joints, poor adhesion and unnecessary material waste.

Surface Preparation and Tile Installation

Before placing tile, the worker must inspect the base, determine the layout and mark reference lines. Proper preparation supports adhesion and helps the finished installation remain level and durable. Underbeds, brackets, anchor bolts or wire systems may be required depending on the surface and project specifications.

Tiles are then positioned, pressed into the prepared base and adjusted to maintain a consistent pattern. After the setting material has reached the appropriate stage, grout is packed between joints and excess material is removed without damaging the surface.

Repair and Replacement Work

Repair assignments require the tilesetter to remove damaged pieces carefully, prepare the exposed area and install matching replacements. The worker should protect neighbouring tiles and surrounding finishes while completing the repair.

Working with Marble, Granite and Terrazzo

This position extends beyond standard ceramic tile. The successful candidate will cut, surface, polish and install marble and granite. These materials require controlled cutting, careful handling and accurate placement because they can be heavy, valuable and vulnerable to damage.

The role also includes mixing, laying and polishing terrazzo surfaces. Candidates should be able to follow the required mixture, place the material consistently and use suitable finishing methods to produce a smooth, professional result.

Qualifications for the Tilesetter Job

Applicants must have completed secondary school and need three years to less than five years of relevant experience. English is required for understanding project instructions, discussing installation requirements and communicating safety concerns with supervisors, clients and other trades.

• Secondary school graduation certificate.
• Three to less than five years of tilesetting experience.
• Ability to measure and mark layouts accurately.
• Experience with tile, marble, granite and terrazzo.
• Good hand-eye coordination.
• Strong attention to detail.
• Availability for day and weekend work.
• Ability to work at various project locations.

Physical Requirements and Safety Equipment

Tilesetting is physically demanding and requires frequent bending, crouching and kneeling. Workers may handle tools, tile, stone, setting materials and other construction supplies throughout the day. Good hand-eye coordination is needed when measuring, cutting, aligning and polishing materials.

The employer requires steel-toed safety boots. Candidates should confirm whether additional personal protective equipment—such as eye protection, gloves, hearing protection, knee protection or respiratory protection—is supplied or must be provided by the worker.

• Use safe lifting and material-handling techniques.
• Inspect cutting and polishing tools before use.
• Keep work areas organized to reduce trip hazards.
• Use suitable protection for dust, noise and sharp materials.
• Follow site-specific safety and equipment procedures.

Salary and Work Schedule

The advertised salary is $37.50 per hour for 32 hours per week. At the regular scheduled hours, gross weekly earnings would be approximately $1,200 before deductions. Actual earnings may vary based on hours worked and applicable employment rules.

This is permanent, full-time employment with day and weekend work. Applicants should ask about the normal start time, project travel expectations, overtime availability, pay frequency and how schedules are communicated.

How to Prepare Your Tilesetter Application

Prepare a focused résumé describing your tile and stone installation experience. Include the types of residential, commercial or construction projects you have completed and the materials, tools and finishing methods you can use confidently.

• Use “Application – Tilesetter” as the email subject.
• Attach an updated résumé in PDF format.
• Highlight three to five years of relevant experience.
• Mention marble, granite and terrazzo experience.
• Describe surface preparation, layout and repair skills.
• Confirm your availability for day and weekend work.
• State that you have steel-toed safety boots.

If available, include a small portfolio or links to clear photographs of completed work. Do not send banking information, passwords or unnecessary identity documents with an initial application.

Alberta Tilesetter Employment Resources

Tilesetters are classified under NOC 73101 in Canada. Applicants can review occupational duties, wage information and Alberta career guidance through the official resources below.

Job availability, duties, schedules and employment conditions may change. Verify every detail with the employer before applying, travelling or relocating. Canada Job Unit does not guarantee employment, immigration approval or sponsorship.